Remo Recover (Windows) Software is the best tool for recovering data from windows operating systems. This software can successfully recover and restore the data lost due to the following reasons:

• Corrupted File System
• Accidental deletion
• Formatted or accidentally formatted partitions
• Re-partitioning of drives
• Sabotage
• Partition Table has been damaged

This is a non-destructive and read-only utility that do not require any technical skills for the user to operate. In fact, these utilities are so easy to use that all you need to get started is to just install the software, select the hard disk/removable media from where you need to recover data, and then follow the systematic process until the software algorithm automatically rebuilds your files. You can then save the recovered data to a CD or another healthy partition or drive; also it can be saved to an attached external new hard drive.

The demo version of the software is available for free which allows the user to test before purchasing. Demo version gives you a fair idea on chances of the results that full version might deliver.

Once the results of the demo version are satisfactory, you can then go ahead and purchase the software. On purchase, you would get a link to download the software and a serial key to activate the software.

Windows data recovery process:

Step 1: Launch the Remo Recover Main application either from start menu or from desktop shortcut, main application window is as shown in the figure a.

Figure a: Remo Recover main window

Step 2: Click on . As you click on the button, you get a window as shown in figure b.

Figure b: FAT Partition Recovery

At this stage of process, you need to decide whether you want to recover data from a NTFS partition or from a FAT partition.

• If you have to recover data from a NTFS partition go through the article Recover lost files from a NTFS Partition.
• If you have to recover data from a FAT partition then continue following the steps as explained below.

Continue the recovery process by clicking as shown in figure b.

Step 3: As soon as you click FAT Partition Recovery, FAT Partition Recovery application window will be displayed as shown in figure C.

Figure c: Application Main Window

Step 4: Select Recover your data option and click on Next to continue. As you click on Next, a window will be displayed to select the physical drive from which data needs to be recovered as shown in figure d.

Figure d: Select Physical drive

Select a source drive and the processing mode to process the drive. Remo FAT partition Recovery software provides two processing modes.

1. Display default partition(s)
2. Search for lost partition(s)

By default the processing mode is set to Display default partition(s). [In this mode, the partitions will be displayed using partition table. However if the partition table is damaged and no information about logical drives is available, a message to select "search for lost partition(s)" is displayed. Then check "search for lost partition(s) option and click on next button. This mode will scan for logical drives to get the partitions.]

As you select the default processing mode and click on Next button, the application analyses the drive and lists all the found partitions in the table as shown in Figure e.

Figure e: Found Partitions

Step 5: Select a partition for processing and click on Finish button. The application processes the partition and displays the found files and folders in a tree structure as shown in Figure f.

Figure f: Found Files and Folders

Step 6: Once the files and folders you are looking are listed in a tree structured form, the next step you need to do is to recover the data to a safe location.

After tree formation, you can save entire tree/selected tree to any desired location using “Save all” from Tools menu or right click on Folder/ File and select Save option. As you click on Save option, you get a window as shown in figure g to select destination location to save the recovered data.

Figure g: Save Window

Data can be saved to any desired destination location in your local hard drive(s). Select a path and click on OK button. As you click on OK button, saving process starts. Once saving process is complete, you will receive a pop up message intimating the same.

All the files will be saved in a folder by name “#” in the selected destination location.

Important Note:

• If you do not find your files and folders in the tree structure formed, then run Turbo scan option from Tools menu. In this operation, the application performs rigorous search to find files and folders and will list all the found files and folders.
• You can save scanned information from “Save scan information” option in Tools menu. You can open scan info file whenever required using “Open scan information” option in File menu and recover data to desired destination location.

Tags: accidentally formatted partition recovery, partition recovery, recover data from hard drive, recover files, recover files from reformatted hard drive, recover formatted partition data, recover lost data