The recent development in SSD technology has pulled a great deal of attention. In a revolutionary growth rate, SSD has become faster, stronger and cheaper over past few years. Most of the PCs have the conventional HDD drive in them. So if you wish to replace the old hard drive with a new SSD, here is what you should do. Further, in this text, I will explain how to install SSD in your Computer.
Apart from being virtuous to a great extent, the SSD has a great effect in your user experience. If you are using windows and upgrade your system with a new SSD. You can see significant improvement in the way your computer works. Eventually, the windows start loading faster, other commands are executed efficiently and much more.
So if you are looking for a better user experience with your PC by installing a new SSD drive, go ahead. There are a few things to take care of while installing the drive. Here is a guide for you to install SSD on your computer.
Before going ahead and getting a new SSD for your computer, you should run a small check. This should be considered the first step to installation or an upgrade check. As it is well known that installing an SSD may cause a great deal of performance increase in your system. The computer needs to support your new drive. It can decrease the boot time from an average of 41 seconds down to 16 seconds.
Open the CPU and look for the mount or a slot for additional drive installation. Most of the computers have a slot that is around 3 and a half inch wide. This width is way more for your SSD as it is thinner and just 2 and a half inches wide. If your computer has the proper slot, or just get a mount for the new SSD.
Connections made with the SSD are Serial data connection and is known as SATA connectors. Make a confirmation about the hard disk connectivity of your computer. The SATA comes in various versions like SATA 1, SATA 2 etc. And SSDs have the backward compatibility which means, if your computer has SATA 2, you can use SATA 1 and 2 on your computer. The speed varies with different versions of SATA, but it should be of your least concern. The overall performance of SSD would be much better in any case.
Post installation, the SSD may need to be formatted in a while, as you start using it. It is very important to keep the data backup or your old hard drive safe for a while. It will help you to get your data back after format. At times if you lose data from your drive, an app to restore SSD drive after format or a recovery tool can help you.
How to Install SSD?
Installing SSD is among the easy tasks you can perform on your PC. There are predefined ports and slots for your new SSD in the CPU. Make sure that you have all the relevant equipment, screwdrivers, and your new SSD drive. And go ahead with these steps to successfully install the drive.
Step 1 – Remove the panels that cover your computer, make use of a screwdriver to unscrew the panels. Keep removing the slides until you have seen the SATA ports and motherboard.
Step 2 – Mount the SSD – You can find the mounting slot or a slide that carries additional hard drives. Make use of the mount if the slot is too wide for your new drive.
Step 3 – Connect the SATA to SSD – Connect the cable to SSD at one end and to the SATA port on the other. Now connect the power cable for SATA to your new SSD.
Step 4 – Disconnect all the other drives connected to your computer for OS installation.
Step 5 – Insert the USB with installation files and switch on the computer with the boot menu. Select the boot device as your USB and install the Operating system on your SSD.
Once you do the installation, you can remove your USB drive and restart the computer. The fresh start will be your new SSD computer drive. You can also connect the other drives and your old hard drive after the installation.
Finally, you can see that installing a new SSD to your computer is quite simple. You just have to take certain precautions in order to perform it smoothly.