Récupération de Données

Program til Gendannelse af Harddisk
Bedst
Sælgende

Program til Gendannelse af Harddisk

Alt i En Gendannelse af Data Software

Gendan data efter format eller partitionsfejl.

$109.97

$99.97

Køb Nu

Logiciel de Reparation de Fichier

Logiciel de Reparation de Fichier
Meilleur
Vendeur

Réparation MOV Outil

Complet Logiciel de Réparation Vidéo

Réparer votre Impossible de Lire (MOV & MP4) Vidéo en Toute Sécurité

$79.97

$69.97

Acheter Maintenant

Outils Outlook

Outlook Outils
Meilleur
Vendeur

Sauvegarde et Transfert Outlook

Outil de Sauvegarde Outlook Ultime

Méthode sécurisée de Sauvegarde et déplacement des mails et contacts

$59.97

$49.97

Acheter Maintenant

Remo ONE

Remo ONE

Autres Utilitaires

Autres Remo Outils
Meilleur
Vendeur

Logiciel Suppression Photo en Double

Logiciel Recherche photo en Double et Nettoyage

Recherche et Supprimer des Photo en Double et Augmenter L'espace Disque en 3 - Clics !!

$29.97

$19.97

Acheter Maintenant

Français

Comment Corriger Périphérique de Stockage ne Fonctionne pas Utilisant de Diskpart sous Windows 10

Even if you have taken thousands of precautions to keep your drive in good working order, we know that it is almost certain to encounter an error message at some point.

And while many of us are not geniuses of technology to solve these problems, it’s not easy, we’re all looking for help.

But without a good understanding of the problem, sometimes things can backfire. Let’s start with the problem first …

What might not work when your storage device does not work?

So you were late for a very important presentation and suddenly your computer crashes. Basically, it’s not a PC problem because it says your « reader is not accessible ».

This may be due to data corruption, a drive that displays an incorrect capacity, or a drive that can not be formatted. Whenever you fill up your storage device with a lot of things and there is no proper formatting, it is almost certain that you will encounter these problems.

So what are you doing now?

Whenever you encounter a problem like this, start by examining. Sometimes, when Windows does not detect the drive, all you need to do is turn off and turn on your system. Sometimes, Windows does not see or recognize your player at all. In this case, unplug your player and try connecting it to another USB port. If it recognizes there and not in this one then, you simply have a dead USB port. After trying these two things, if nothing works, all you need to do is clean up or format your storage drive. There are several ways to clean and format your drive, one of the simplest is to use Diskpart on Windows 10.

Remember, when you go clean your storage drive, be sure to pay full attention. You do not want to erase or clean an important file that you may need later. Using diskpart on Windows 10 not only solves your problem but also erases everything you select on this drive. So, before moving forward, be sure to make a full backup of your system.

Start a command prompt as administrator:

To start the command prompt as an administrator, you must either right-click the Start button or press the Windows + X key and select Command Prompt (Admin).

Use Diskpart to clean the storage drive:

Make sure you have connected your storage device whether it is a USB flash drive or an SD card or any other storage drive.

  • To launch the diskpart tool, type the following command ‘diskpart’ in the command prompt window and press Enter.
  • Type the following command ‘list disk’ to list all available drives and press Enter.
  • Identify the drive you want to clean. Use the ‘select diskxxx’ command to select the drive and press Enter.

Make sure you select the correct drive and type the correct drive number, otherwise you will have cleaned up the important data.

  • Once you have made sure you have selected the correct drive and typed the correct drive number. You can now go ahead and type the following command « clean » the drive and press Enter.
  • You used diskpart successfully to clean the drive. In case, you have erased the wrong drive or accidentally typed in the wrong disk number, you can still go to DIY guide on recovering partitions after using DiskPart

Initializing the disk partition:

You should be able to initialize the partition and format the drive as you normally would.

  • Start by typing the following command ‘create primary primary’ and press Enter.
  • Now, type the following command ‘select partition 1’ to select the partition you just created and press Enter.
  • Now go ahead and set the active partition by typing the following command ‘active’ and press Enter.

Formatting the disc:

Now that you have finished the score, you will now initialize the formatting of the disk to complete the process.

  • Type the following command ‘FS = NTFS label = WC-Drive quick’. Be sure to replace ‘WC-Drive’ in the command with the name of the drive you wish to use. This is to format the partition using NTFS and to define a label. Do not forget to press Enter.
  • Now type the following command ‘assign letter = W’. Again, change the ‘W’ with a letter you want to use and press Enter.
  • Finally, type the ‘exit’ command to complete the task.

Remember, you want to make sure that you clean the right disk with the right disk number. Although there may be many other tools to format a disk, you want to avoid confusion and continue with diskpart so that the process is fast and complete. In addition, it will save you time and effort to recover data after quick formatting .

Image par défaut
John Harris

Senior Editor, Content Analyst and a fan of exceptional customer service. John develops and publishes instructional and informational content regarding partition management, Windows hot-fixes, data management and computer troubleshooting.

As a tenured data recovery specialist, John shares exceptional insights and blog posts about data loss and data recovery across any storage device. With 8+ years’ experience in writing for Data Recovery for both Mac OS and Windows OS computers, he is an avid learner who always wants to polish and simplify the data recovery process. John passes his free time playing Chess and reading Science Fiction novels.

Publications: 68

Laisser un commentaire