Wondering how to fix the No Boot Disk Detected error on Windows. In this article find troubleshooting ways to quickly resolve the error. In case of data loss in the process use a reliable data recovery tool such as Remo Hard Drive Data Recovery tool to effortlessly recover data.
Encountering an error message like "No Boot Disk Detected" or "Disk has Failed" can be frustrating, especially when starting your computer. This error indicates that the computer's BIOS or UEFI cannot locate a bootable disk to load the Operating System. In this article, we will help you to fix the "No Boot Disk Detected" or "Disk has Failed" error using five proven methods.
The 'No Boot Disk Detected or the Disk has Failed' error can occur for various reasons. Some of the common causes include:
When faced with this error, users may experience the following symptoms:
The troubleshooting methods involved in fixing the error might lead to data loss. Before you head to the steps, it is suggested that you back up your data. If your drive is inaccessible and you're wondering how to back up data, there's a quick solution you can try.
Download the Remo Recover software and recover the data from the inaccessible drive since the tool locates your drive easily.
Ensure you save the recovered files in a secure location to prevent accidental data loss. By saving the recovered files from the unbootable hard drive, you safeguard your data in case any troubleshooting steps lead to further complications. Once your data is safe, you can focus on resolving the boot disk error using appropriate troubleshooting methods.
To resolve the 'No Boot Disk Detected or the Disk has Failed' error, follow these troubleshooting steps:
First, ensure that all physical connections between the hard disk and the motherboard are secure. Power off the computer, unplug it from the power source, and then open the case. Verify that the SATA or IDE cables are firmly connected to the hard disk and the motherboard. You may need professional assistance to check internal connections if you have a laptop. Sometimes, faulty cables connecting your hard drive can result in the hard drive not being detected by the computer.
Access your computer's BIOS or UEFI settings during startup (usually by pressing F2, F10, or Delete key). Navigate to the "Boot" or "Boot Order" section and ensure the primary boot device is set to the correct hard disk where the Operating System is installed.
If the boot disk has corrupted or missing files, you can run a disk check and repair utility from the Windows Recovery Environment or use a bootable USB/DVD with a repair tool.
This error could be due to a failing SSD or hard drive, as the error states that the boot disk has failed. To check this, connect the drive to another already-booted computer and see if you can access the contents.
If the above methods listed are not working, then the computer’s boot disk has not failed, but the Operating System or the boot disk's boot information could be erased.
If this is the case, cleaning and installing Windows from scratch is the best solution. However, be careful that clean installing Windows will lead to data loss.
Encountering the 'No Boot Disk Detected or the Disk Has Failed' error can be alarming. Still, with the proper troubleshooting steps, data recovery options, and preventive measures, you can address the issue effectively. Always prioritize data backups and maintain disk health to safeguard against potential future disk failures. In case of unexpected data loss, you can always depend on the best hard drive data recovery tool like Remo Recover to retrieve your valuable data from the Windows system.