Wondering whether it is possible to repair your RAW USB drive and recover data from a RAW USB drive? Don’t worry, this article will guide you to effortlessly restore data from USB drives and also provides you all the necessary information to fix your RAW USB drive yourself. If you are looking to quickly recover data from RAW USB drive, make use of Remo USB Recovery Software to get back your files. Download the tool for free now.
I have a USB flash drive that I have been using for a long time. Yesterday when I was about to use it the computer told me that I couldn’t open the USB drive. When I checked the properties of it, I found my USB drive was 0 MB with the RAW file system. There are lots of important files on my USB drive. Can I recover files from the RAW drive?
- A User Query from Quora
You might have encountered a similar issue. USB turing RAW is an inevitable issue. Hence it is recommended to always take a backup of your important data prior. If you have not taken the backup then worry not. You can still recover the data only if the USB drive is not overwritten with the new data. Move to the next section of the article, to find out whether your USB drive has turned RAW.
These are some of the common indications you will see when your USB drive has turned RAW. As you can see there is no clear indication that will say that your drive is RAW. Hence, it is important for you to notice these indications to understand the problem.
Reasons Behind USB Turning RAW | Solutions to Fix RAW USB Drive |
Interruptions like sudden power failure or abrupt system shutdown while formatting into different file systems. | You can try running the error checking tool. This will help you fix any corrupted file systems. |
Ejecting the USB while file transfer can turn the USB drive as RAW | You can run the chkdsk command on the Command Prompt in the Admin mode to fix the issue. |
Virus attack or a malware infection to the computer | You can try fixing the issue using the Command Prompt, if the issue is not resolved yet you can opt to format the USB drive. |
If the USB is brand new | If you purchase the USB drive for the first time it will be RAW, hence you need to assign the drive letter. |
When you notice that your USB drive has turned RAW, the first thing you worry about is getting back data from the RAW USB drive. However, recovering data from any drive that has turned RAW cannot be done manually and should be done only through trustworthy USB recovery software. We recommend you make use of Remo Recover.
The tool is built with a deep scan engine that can scan every sector of the drive to recover data from RAW USB. Additionally, the tool can recover data from more than 500 file types like images, audio, video, Raw media files, and office files from any USB Drive that has turned RAW.
This tool has a 4.5-star rating on trusted platforms like Trustpilot. We have mentioned a note-worthy review to help you decide better.
Becca- 1 Review - US- rated 5 out of 5
I Was very happy with Remo Software
I was very happy with the Remo software. They were able to recover all the files on my USB that I thought were lost! Remo is a safe and user friendly service. I highly recommend them.
Soruce: Trustpilot
Download and Install Remo Recover Software on your computer. Plug in the USB drive from which you want to recover data and follow the below-mentioned steps:
Note: If you are unable to find your RAW USB drive or if your USB drive is not getting recognized, click on the Can’ find Drive option.
To fix a RAW USB drive there are various methods that will help you fix a RAW USB drive. The following are the best possible ways to fix your RAW USB drive after recovering data.
Using a built-in error-checking tool is the easiest way to fix RAW USB drive. Follow the below-mentioned methods to fix RAW USB drive using the error-checking tool:
If the above-mentioned method did not help you fix your RAW USB drive then go to the next method where you have to format the USB drive into the desired file system.
Important Note: Formatting a RAW USB drive will erase the existing on your drive and make your USB drive readily available for use. Hence proceed with formatting, if you have recovered data from the RAW USB drive like with the above-mentioned method. Otherwise, you will be wondering how to recover data from Formatted USB drives.
The simplest way of formatting any drive is just by clicking on the drive and clicking on format i.e. as mentioned below:
Considering that your USB drive has turned RAW there are chances that formatting using the above-mentioned steps might fail hence try the next method which guides you to format the USB drive using Disk management.
To fix the RAW Pen drive you need to run the chkdsk command on your Windows. Connect your USB to your Windows computer.
In case your RAW USB drive is not recognising or showing the drive letter then you will need to format the drive using Command Prompt.
Note: Make sure you take a backup or recover data from the USB drive before you format.
Although the above-mentioned precautions will help you avoid your USB drive into RAW but it doesn’t guarantee it. However, the methods mentioned in this article will not help you recover your data from your RAW USB drive but also help you repair RAW USB drives.
Please do share the article and review our tool if you were successful in recovering data from your RAW hard drive. Do make use of the comment section if you have any query regarding RAW USB Drive Recovery.
To fix the RAW USB flash drive without formatting you can make use of an error checking tool to scan and fix the issue.
1. To do so, connect the USB drive that has turned RAW to your Windows computer.
2. Go to the File Explorer, right click on the USB drive and click on the Properties.
3. Now navigate to the Tools tab and click on it and you will see the Error checking and click on the Check option.
4. Finally select the Scan and Repair Drive option to start repairing the RAW flash drive.
Before you try to fix the RAW USB drive, check if there is no issue with the drive, the drive is working fine whether it is getting recognised on Windows. If you feel the issue is with the USB drive which is not recognising then you can fix it. To do so, follow the steps below.
Note: Before running the chkdsk command, try to recover your data first by using USB Recovery tool, then you can proceed with running chkdsk commands.
● Connect your USB to your Windows computer.
● Then go to the Search bar and type cmd and select Command Prompt and Run as Administrator.
● Now type chkdsk /f E: (replace E with your drive letter) and hit Enter.
To change the flash drive from the RAW to FAT32 you need to connect your RAW USB to the Windows computer and follow the steps below.
● Go to File Explorer and go to your USB drive and Right click on it.
● And click on the Format option and then select the file system as FAT32 and click on the OK option.
No, it is not possible for Windows to read the RAW file system. Since the RAW file system is not a standardised file system hence Windows cannot recognise the RAW file system.
Yes it is possible to open a RAW file. You can try opening the RAW files using the image editing softwares like Adobe Photoshop, Adobe Lightroom, etc.
You can try fixing your RAW USB flash drive on the Mac with the help of Disk Utility. To do so, navigate to the Disk Utility and select the RAW USB drive and click on the Erase button. This will fix the RAW flash drive.