Have you encountered an IO error on USB? This error can make your data on USB not accessible putting your precious data at risk. In this article we have covered 8 easy solutions on how to fix IO errors on USB and recover your important data safely from it. However, if you are looking for quick and safe recovery you recommend you make use of the USB Recovery tool by Remo.
“I have been facing an error which says “The request could not be performed because of an I/O error” whenever I am trying to access my USB drive I am unable to perform any action. How do I get rid of this problem and fix the IO error on my USB drive?”
- A User Query from Quora
If you are facing a similar issue then you have landed at the right page. In this article, we will discuss some effective solutions to fix the IO error on your USB flash drive. Before going ahead with solutions, let us firstly understand more about the IO error.
I/O device error stands for Input-Output Error and it occurs when the OS is not able to perform an input-output action making the flash drive inaccessible. It affects the read - write functionalities of USB drives. Here are the most common I/O error messages you will receive when you are facing issues with IO error on USB flash drive.
Symptoms of IO error on USB | Causes of IO error on USB |
You might receive an error “The request could not be performed because of an I/O device error”. | There are chances that it could be due to the connectivity issues between your Windows PC and USB flash drive. |
You might receive a message in the window prompt stating: Disk Unknown or Not Initialised. | Your external storage device might be damaged or corrupted |
It might also displays error codes like- error 6, error 21, error 103, error 105, error 131 | 1. There are chances that your device drive is outdated. 2. There are chances that your USB is damaged. |
Either of a part of the request is completed. ReadProcessMemory or WriteProcessMemory request was completed. | There might be chances that your USB controllers have become unstable or corrupt. |
Methods to fix IO Error on USB Drive | Risk Level | Difficulty Level |
Check if the cables are connected properly | Low | Easy |
Fix IO error using Clean Boot | Low | Easy |
Uninstall and Reinstall USB Controllers | Low | Easy |
By using Device manager | Low | Easy |
Update The Device Driver | Low | Easy |
Fix I/O Device Error USB Flash Drive In Command Prompt | High(possibility of data loss) | Medium |
Change Transfer Mode in IDE | Medium | Easy |
Change The Drive Letter | Low | Easy |
Note: Before resolving the error, if you have lost any data, like documents, images, or videos you can utilise USB recovery tool. As this is your only remaining opportunity to restore the data, it is advised.
A dependable flash drive recovery tool called Remo Recover can easily recover lost or deleted data from corrupted, damaged USB drives. In just few clicks, you may be able to recover your data from the flash device that has an IO device error. Download it right away to easily restore the data.
Make sure that the cable connecting USB to the computer works properly. If the cable is faulty, the drive will not work. Try another cable and also try connecting the USB to another USB port to make sure the port is not defective.
If a clean boot works properly, there may be problems with a driver or program on your computer.
A fault with the USB controllers may occasionally prevent the USB drive option from appearing on your computer. The I/O problem on the computer can be fixed by reinstalling the USB controllers.
Repeat for each device and once complete, restart your computer. Your USB controllers will automatically install.
Note - If you are wondering how to fix IO error on external storage devices, click on the given link.
If your device is using transfer mode, which is not supported by your external device, then it returns an error “The request could not be performed because of an I/O device error.” To fix the issue, you need to change the transfer mode in IDE. To do so follow the steps below.
Note: Make sure you don't change the primary IDE channel to Device 0.
In the Transfer Mode box uncheck the Enable MDA in the Advanced Settings tab and then click on the OK option.
Now check if you are able to access your USB drive else move to the next section of the article.
You could occasionally be unable to access a drive letter because it is invalid; in this instance, replace the drive letter by following the instructions below.
Now if you receive this "Format to access the Drive" or any similar message, you can still fix a USB drive without formatting.
In case if you have already formatted the drive without taking the backup then we recommend you make use of the USB recovery tool to get back the lost data.
There are a number of tools available to recover data from inaccessible USB. Remo Recover is one of the best tools available, with more than 10 million downloads across the globe. It can recover data from inaccessible and corrupt USB drives. Additionally, this USB Recovery tool can recover more than 500 file types like Office files, audio, video, images, RAW media files, etc.
Source: Trustpilot
Note - If you have deleted or lost files from USB drive check this information on how to recover them.
Conclusion
The article summarises how to fix IO errors on your USB and recover data residing on the external storage device (USB). To avoid any data loss issues in the future it is recommended you take a backup of your important data. In case if you have not taken the data then as we discussed in the above section of the article, use the powerful USB Recovery tool by Remo. If you have any further queries regarding the article, make use of the comment section below.
Yes, there are chances that a physically damaged USB device will lead to IO device error on the USB drive. In case the USB drive is bent or broken, this will make the USB unreadable.
Yes, there might be chances that it can lead to IO device error, since when the USB drive tries to read the corrupted USB drive you might encounter the error ‘unable to complete the operation’.
Yes, there might be chances that having a problem with a computer's Operating System will lead to outdated or corrupted device drivers, system setting issues, or conflict with the software might lead to IO device error on USB.
First try to format the USB drive. In case formatting is not assisting you to fix the issue then you can seek the help from professional data recovery services.