How to Fix Outlook Send Receive Error?

Table Of Content

1. Check your Internet Connection
2. Disable Windows Firewall and Antivirus Program
3. Check for Suspicious Emails
4. Correct the Outlook Email Settings
5. Clear Outbox and Change Server Time-out
6. Run Outlook in Safe Mode
7. Repair MAPI error using FiXMAPI.exe
8. Incorrect Mail Address in SMTP Distribution List
9. Repair PST file to Fix Outlook Send Receive Error

Outlook Send/Receive error is one of the most common Outlook errors across its user community that could come as a "Mail Delivery Failed Returning Message to Sender" error.  There are many reasons why you cannot send or receive Outlook email. This can harm your work efficiency. But did you know that you can easily fix the Outlook error code 0x80040610 that is responsible for obstructing the sending and receiving of emails? Yes, this article is compiled with 6 simple methods that can help you fix Outlook send-receive errors easily.

Methods to Fix Outlook Send Receive Error.

Here are the 6 most reliable methods to fix Outlook send and receive errors with ease. You can either try the DIY methods first, or you can directly utilize a reliable Outlook PST Repair tool mentioned at the end of this article to fix any issue related to send/receive errors.

1. Check your Internet Connection

It is absolutely vital to have an internet connection to be able to use Outlook to send messages. We recommend that you try out the following to write off connectivity issues as the cause.

• Turn your Wifi router off for 15 seconds and switch it back on.
• Try using your mobile hotspot.
• Try accessing different websites on your browser

 If you are still experiencing issues with Outlook, then try some of the steps below-

2. Disable Windows Firewall and Antivirus Program.

The Outlook send-receive error can also occur due to suspicious emails that are dropped into your inbox. So clearing those suspicious spam emails can help you fix the Outlook send-receive error that stops you from sending or receiving emails.

• Open the Control Panel and click on Network Connections.

• Right-click on the network connection you are connected to and click on Properties.

• Under the Security tab, turn off Firewall.
• Once the problem is fixed and the inbox is updated, enable the Windows Firewall.

3. Check for Suspicious Emails

The Outlook send-receive error can also occur due to some suspicious mail that dropped into your inbox. So clearing those suspicious spam emails can help you fix the Outlook send-receive error that stops you from sending or receiving emails.

If this doesn’t stop your Outlook from throwing the Send/Receive error 0x80040610, try the next method.

4. Correct the Outlook Email Settings

If the above methods didn’t fix Outlook send-receive error, then you should verify your Outlook email settings. Improperly configured Outlook email settings can make your Outlook throw this error 0x80040610.

• Open Outlook and Click on File.
• Click on Account Settings -> Account Settings.
• Under the Account Settings window, click on Change

• Now, click on More Settings and select Outgoing Server

• Click the checkbox next to My outgoing server (SMTP) requires authentication.
• Also, select the checkbox next to Log on to the incoming server before sending mail.

Restart Outlook and see if you are able to send emails. If you are still facing the Outlook Send Receive error, then move on to the next method.

5. Clear Outbox and Change Server Time-out

The server time-out duration is 1 minute by default in Outlook. When you try to send emails with large attachments, the default server timeout will be insufficient. This leaves your emails stuck in the outbox. Hence clearing outbox and increasing the Server timeout duration can help to fix Outlook send receive error.

To change Outlook server timeout, follow the steps below:

1. Start Outlook and click on File
2. Follow this path: Account Settings -> Account Settings -> Change -> More Settings -> Advanced
3. Under Advanced,  increase the Server Timeouts slider based on your need.

This will allow Outlook to send or receive emails of large size. If you are still facing the Outlook Send Receive error like outlook error 0x800ccc92, then try starting Outlook in safe mode. If you have trouble starting MS Outlook, check this article to know how to fix cannot start Microsoft Outlook error.

6. Run Outlook in Safe Mode

Outlook Send/Receive error occurs with different error codes. And running Outlook in Safe mode can easily fix most of them, including 0x80040610.

Many a time, incompatible add-ons stop your Outlook from sending or receiving any email. Therefore, you should try sending emails after launching Outlook in safe mode. 

To launch Outlook in safe mode, type Outlook.exe /safe in the search box and press Enter.
If this doesn’t fix Outlook send-receive error, then it can be a corrupt or damaged PST file causing this error.

Note: Check out this article if you want to know how to repair OST file using 3 different methods.

7. Repair MAPI error using FiXMAPI.exe

MAPI is a set of programs that enable Outlook to send and receive messages. You can face Outlook errors while sending or receiving emails if your MAPI is damaged. However, we can repair IMAP using FixIMAP.exe, a system tool that scans the MAPI registry setting on your system and attempts to repair any errors or corruption that it can identify.
Note: Using FixIMAP.exe can prove to be risky and should be used with caution. It is always recommended to make a backup of your Outlook data before you begin.

Steps to Fix MAPI error using FiXMAPI.exe

• Close Outlook and all Outlook-related Windows.
• Open the Start Menu and search for Command Prompt using the search bar.
• Right-click on the command prompt and choose Run as Administrator.

• In the Command Prompt window, navigate to the directory where FixMAPI.exe is located or type in the command “dir /s /b FixMAPI.exe.” This command will locate the program and display its location.

• Once you have identified the location of FixMAPI.exe, navigate to that directory by using the "cd" command. For example, if FixMAPI.exe is located in the "C:\Windows\System32" directory, you would use the command cd “C:\Windows\System32”.

8. Incorrect Mail Address in SMTP Distribution List

SMTP Distribution Lists are groups of email addresses that are used when sending emails that have multiple recipients.

If you are experiencing issues related to having an Incorrect Mail Address in the SMTP Distribution List, then you can follow the given steps to rectify it-

• Open Outlook, and click on Contacts or the People icon, depending on the Outlook version in use.

• Go to the distribution list that needs to be fixed
• Right-click on the Distribution List and select Edit or Properties from the context menu.
• The list of emails will be displayed, and You can remove incorrect emails using the Remove or Delete button and add the correct ones using the Add button.

9. Repair PST file to Fix Outlook Send Receive Error

Now that you have tried all the above-mentioned methods to solve Outlook send-receive errors, it's time to repair the corrupt PST file. You can repair corrupt PST files using the built-in inbox repair tool.

Manually repairing the PST file using ScanPST.exe comes with its own disadvantages since the inbox repair tool directly works on the original PST file. And the chances of losing your Outlook data while repairing the PST file manually are high. Hence it is recommended to make use of the best PST Repair software that can repair your corrupt PST file to fix Outlook Send Receive error.

Source: Trustpilot

Remo Repair PST is your best bet for repairing corrupt or damaged PST file. The tool is designed with powerful PST file repairing algorithms that work on a copy of the original PST file, prioritizing the safety of Outlook data. The easy-to-use interface of the software makes the repair process a walk in the park even for a novice user.

Steps To Fix Outlook Send Receive Error Remo Outlook PST Repair

Instructions to Fix Outlook Send Receive Error Using Remo PST Repair Tool

Step 1. Download and install Remo Repair Outlook Software to fix Outlook cannot open PST files.

Step 2. Launch the tool and select an option based on your need and click Next. Open Default PST File: Select this option if the corrupt PST file is located in the defined location.
Select PST File Manually: Select this option if you want to locate your PST file, not opening manually.
Find All Your PST Files: If you have more than one Outlook profile, then select this option to locate all your PST files. Later, you can select the inaccessible Outlook PST file that needs to be repaired.

Step 3. You can use the Browse option to select the PST file that you wish to repair.

Step 4. Click the Smart Scan option and select a destination of your choice to save your Repaired PST file on your Windows and click Repair.

Watch the Video Tutorial to fix Outlook Send/Receive Errors by using the Remo PST Repair tool:

Benefits of using Remo Repair PST:

• Ensures quick repair of PST files with all Outlook items intact.
• Designed to repair even password-protected or compressed PST files easily.
• Tailor-made to fix CRC errors in PST files along with Outlook error codes 0x80040610, 0x800ccc0e, 0x80040600, etc.
• Facilitates a preview of repaired Outlook data in an Outlook-style browser.
• Supports all versions of Outlook 2003, 2007, 2010, 2013, 2016, and 2019.
• Available across all versions of Windows operating systems, including the latest Windows 10.

Conclusion:

The Outlook send-receive error can be easily fixed using the above-mentioned methods. It is not too often that a PST corruption leads to the Outlook error 0x80040610. However, if you fail to fix the issue with the manual methods, it is recommended to make use of Remo Repair PST. Do let us know in the comments section below if you were successful in fixing the Outlook send-receive error.

Also Read: Fix Outlook Receiving Reported Error 0x800CCC0B